#4:
#5:
31 October 2008
20 October 2008
3 to get ready
A few things I have been working on:
yeah, that's the latest "city sketch" at bottom right, not yet framed.
Those little "city sketches" have got me excited, so I am making more. There are bits of architectural drawings adhered to the canvas with clear medium - it seems appropriate to start a city with some drawings!
And here is a second version of an earlier work:
Don't know how this will turn out, but since I had all those little bits of panel lying around I thought I may as well use them & see where it goes. Perhaps it will turn out nicely, like the first one did:
yeah, that's the latest "city sketch" at bottom right, not yet framed.
Those little "city sketches" have got me excited, so I am making more. There are bits of architectural drawings adhered to the canvas with clear medium - it seems appropriate to start a city with some drawings!
And here is a second version of an earlier work:
Don't know how this will turn out, but since I had all those little bits of panel lying around I thought I may as well use them & see where it goes. Perhaps it will turn out nicely, like the first one did:
17 October 2008
city sketches
Framed this one - the frame is actually very dark blue.
I think the 3/4" profile canvases look much better in frames.
A little tip:
I have discovered that the lumber store sells mouldings by the foot - you know, the long thin strips of decorative wood used to finish the bit where the walls meet the floor inside a house, or cupboards &c.... well, these mouldings come in a variety of profiles and can be made into inexpensive frames! Very suitable for smaller paintings & may work on larger pieces too.
Just measure carefully, cut on a 45-degree angle, glue corners, use tape to hold it nicely together & put a couple of heavy-duty staples in the back of each corner. Let glue dry a couple of hours, remove tape and paint any colour you like. Easy as pie, almost!
Still have to make frames for these:
How fun it is to make these little things - so fast, and not so "serious" like the paintings I have been getting ready for my show the last few months.
It's been a breath of fresh air!
And who knows, maybe they will go in the show too.
I think the 3/4" profile canvases look much better in frames.
A little tip:
I have discovered that the lumber store sells mouldings by the foot - you know, the long thin strips of decorative wood used to finish the bit where the walls meet the floor inside a house, or cupboards &c.... well, these mouldings come in a variety of profiles and can be made into inexpensive frames! Very suitable for smaller paintings & may work on larger pieces too.
Just measure carefully, cut on a 45-degree angle, glue corners, use tape to hold it nicely together & put a couple of heavy-duty staples in the back of each corner. Let glue dry a couple of hours, remove tape and paint any colour you like. Easy as pie, almost!
Still have to make frames for these:
How fun it is to make these little things - so fast, and not so "serious" like the paintings I have been getting ready for my show the last few months.
It's been a breath of fresh air!
And who knows, maybe they will go in the show too.
15 October 2008
A Little Something
Towery City - lg
03 October 2008
Space and Time
oil on 14 little bits of panel....
measures approximately 48 x 20"
(that vertical piece of shelving bracket is not part of the painting)
this little project was "shelved" for quite some time - actually the pieces were on the studio floor for about a year.
I walked on it, shuffled the table over it, splattered paint on it, &c.
then yesterday I picked it up and mounted it.
if you click on the picture to enlarge you may notice the lovely scratched and speckled surface - couldn't have got that if I'd been trying for it! haha
this is what it looks like from the side:
fairly simple mounting technique - small blocks of wood to float each piece off the wall.
painted the backs to create some reflected light in the shadows.
the floating effect is imperfect because some of the pieces are not perpendicular to the wall....
next one will see some improvements.
measures approximately 48 x 20"
(that vertical piece of shelving bracket is not part of the painting)
this little project was "shelved" for quite some time - actually the pieces were on the studio floor for about a year.
I walked on it, shuffled the table over it, splattered paint on it, &c.
then yesterday I picked it up and mounted it.
if you click on the picture to enlarge you may notice the lovely scratched and speckled surface - couldn't have got that if I'd been trying for it! haha
this is what it looks like from the side:
fairly simple mounting technique - small blocks of wood to float each piece off the wall.
painted the backs to create some reflected light in the shadows.
the floating effect is imperfect because some of the pieces are not perpendicular to the wall....
next one will see some improvements.
Subscribe to:
Posts (Atom)